Section 13 - Operation and Adjustments (continued)
55
To change Harness Strap length:
Each shoulder harness strap has
two sewn loops at the end
(fig. c)
.
- Use the lower loops at the end for
larger infant (longer harness).
- Use upper loops spaced away
from the end of the strap for
smaller infant (shorter harness).
Removing seat pad:
1. Adjust headrest so Shoulder Harness Slots with shoulder harness
straps through them line up with shoulder harness slots in seat
back (see “Shoulder Harness Positioning for Proper Fit” section).
2. From front of car seat, pull harness straps out through seat pad,
and car seat shell.
3. Remove harness straps covers.
4. Remove seat pad.
Reverse above steps to reattach seat pad.
(fig. c)
Lower
Loop
Upper
Loop
Section 13 - Operation and Adjustments (continued)
56
To change Shoulder Harness Slot height:
Shoulder harness slots
MUST
be positioned
at
or
just below
top of
infant’s shoulders. See “Shoulder Harness Adjustment for Proper Fit”
section 7a.
The Shuttle headrest has 2 sets of shoulder harness slots.
Either set of shoulder harness slots may be used provided the
harness slots are
at
or
just below
top of infant’s shoulders.
1. Adjust headrest so shoulder harness slots with harness straps
through them line up with shoulder harness slots in seat back
(see “Shoulder Harness Adjustment for Proper Fit” section).
2. From front of car seat, pull harness straps out through seat pad,
and car seat shell.
