43
Attach tether hook
(A)
to vehicle top tether anchor
hardware
(B) (fig. e)
and pull strap to remove slack
from top tether. Check that the tether strap is not
twisted. Final tightening will occur in a later step.
NOTE:
1. To lengthen the tether strap, tip the
tether belt adjuster and pull the tether
strap back through the adjuster.
2. If top tether anchor
(B)
is not available
in vehicle, see vehicle owner’s manual
or Top Tether Information in “Selecting
A Vehicle Seating Location” section.
3. Tether strap should always be used when a tether anchor
is available. The top tether is used for forward-facing use.
Tighten vehicle seat belt to secure the car seat.
For vehicle lap and shoulder belts:
Shoulder belt lock-off can be used to hold
the vehicle seat belt tight around car seat.
- Open shoulder belt lock-off on side of
car seat opposite vehicle seat belt
buckle. Pull lock-off tab forward and
hold open
(fig. f)
.
- Slide shoulder belt up under
lock-off tab
(fig. f)
and
release lock-off.
(B)
(A)
Pull to
tighten
(fig. e)
(fig. f)
BEL
T
HERE
1
2
1
2
9
10
Shoulder Belt
Lock-off
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:24 PM Page 44
All manuals and user guides at all-guides.com
