Vehicle seat belts located forward of
seat bight
(fig. a & b)
may not securely
hold car seat. Check vehicle owner’s
manual or see vehicle dealer for
car seat installation requirements.
•
If seating position is approved
for use with car seat,
install car seat and
check for secure
installation by
pulling car seat front to back
and side to side. If car seat slides
forward or vehicle seat belt does not
stay tight, DO NOT use these seat belts.
65
Belts Forward of Seat Bight
(fig. a)
Seat
Bight
Belt Forward
of Seat Bight
Buckle
Forward of
Seat Bight
Seat
Bight
(fig. b)
Manually adjustable lap belts
(fig. c)
normally
will hold a car seat tightly. However, in some
cases, the locking latch plate on some seat
belts may slip and loosen if positioned at a
certain angle. If this happens, flip latch
plate over
(fig. c)
and re-buckle. Test
installation again to see if lap belt stays
tight. If not, move car seat to another
seating location.
Lap Belts - Manually Adjustable
(fig. c)
Flip
CCS0210G (EN) 061711.qxd:CCS0210G (EN) 061711 6/17/11 2:25 PM Page 66
All manuals and user guides at all-guides.com
all-guides.com
