Combi AuraStar, Instruction Manual

Page: 33 / 40

32
Awakening function 喚醒功能
In the sleep mode, the stroller can be awakened and resume to normal status by touching
the handle.
推車在睡眠模式下，通過手觸摸把手可以喚醒，喚醒後恢復正常使用。
WARNING
: If the external flexible cable or cord of this luminaire is damaged,
it shall be exclusively replaced by the manufacturer or this service agent or a similar
qualified person in order to avoid a hazard.
警告
：如果此燈具的外部柔性電纜或電線損壞，應由製造商、服務代理商或類似
合格人員專門進行更換，以免危險。
Matching and canceling Main battery with the handle
主控模塊與把手的配對和解除
Matching the Main battery with the handle
Cancelling the match between the Main battery and the touch panel
1. Pull out the Main battery.
2. Press the switch button on the battery until all the indicators flash.
3. Put it within 20cm near the touch panel.
4. Press the Intelligent Auto-Brake button for 5 times.
5. The touch panel lights up to indicate a successful matching.
1. While pressing the AuraBeam button, press the
Intelligent Auto-Brake button for 5 times.
2. Blinking light for Intelligent Auto-Brake means a
successful unpairing.
While pressing the AuraBeam button, press the
Intelligent Auto-Brake button for 8 times.
1.拔出主電池。
2. 按下電池上的電源鍵，直到所有的指示燈閃爍。
3. 把它放在距離把手20釐米以內的地方。
4. 按電源鍵5次。
5. 感應燈帶亮起表示配對成功。
主控模塊與把手配對
1. 按住前燈鍵，連續按自動剎車鍵5次。
2. 自動剎車鍵的燈閃爍意味着成功的解除配對。
按住前燈鍵，連續按自動剎車鍵8次。
主控模塊與把手解除配對
Horizontal calibration 主控模塊的水平校準