ANTENNA MONITORING SYSTEM (AMS) USER MANUAL
ENU STATUS: 1-0-0
Copyright - refer to title page
Page 23
3.2 OMT GUI INTRODUCTION
After connecting, the GUI will un-gray a select group of options, pending if the AMS is in Auto or Manual
mode. By default, the AMS is in Manual mode during first startup.
Click “Status” bar to switch between Auto and Manual mode
o
Status Red – AMS is in Manual Mode. All information is editable
o
Status Green – AMS is in Auto Mode. Information is NOT editable. Alarms will
trigger based on configured parameters and listed tags.
Figure 10: Web GUI Main Screen
Slide to adjust between Auto
and Manual Modes.
Indicates the
equipment status in
Auto Mode
Indicates the
equipment status in
Manual Mode
