USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 70/94
Max FWP Error:
(not changed by default command)
120 %
RFP Input Type:
(not changed by default command)
RF input
RFP Coupler Attenuation:
(not changed by default command)
0 dB
Max RFP Warning:
(not changed by default command)
10 %
Max RFP Error:
(not changed by default command)
20 %
Dual-Drive Redundancy:
Disabled
GPO2 Opening Triggers:
None
GPO3 Opening Triggers:
Output error
Alarm error
RF Switch Monitoring:
Disabled
Transmitter Control:
Disabled
*
Note: different set of parameters are used for Single Carrier modulation (ATSC) and
OFDM modulation (future ATSC 3.0) in regards to their:
o
Frequency (Carrier frequency in ATSC // Center frequency in ATSC 3.0)
o
Attenuation
o
Gain offset
o
Linear Precorrection activation (with separate curves banks)
o
Non-Linear Precorrection activation (with separate curves banks)
*
Note:
On the WEB GUI, the input equalizer is automatically changed to « disabled » when the
user selects the « SMPTE » input type.
ATSC 3.0 (Available from the S110 firmware version)