USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 68/94
ATSC 1.0
Other Parameters
Default Settings
Standard:
(not changed by default command)
ATSC
Test Mode:
Disabled
Serial Speed:
57600
Serial Protocol:
Standard
Auto Logout Time:
Off
ASI/SMPTE_IN1 Type:
ASI
ASI/SMPTE_IN2 Type:
ASI
ASI/SMPTE_IN1 Equalizer* :
Disabled
ASI/SMPTE_IN2 Equalizer* :
Disabled
Primary Source:
ASI/SMPTE_IN1
Secondary Source:
ASI/SMPTE_IN2
ASI Output
OFF
TS CleverSwitch:
Auto_Switch_Back:
Packet error threshold:
Packet valid threshold:
Enabled
Disabled
5
80000
ATSC signalization:
8-VSB
ASI management unit
(Bit rate adaptation):
Enable
Major Channel number update:
Disable
Major Channel number:
0
Carrier Frequency update:
Disable
Carrier Frequency for Carrier Frequency
Update:
665 MHz
Bandwidth:
6 MHz
Center Frequency (ATSC) *:
665 MHz (channel 46)
Output Attenuation (ATSC) *:
0 dB
Crest Factor:
10.0 dB
Crest Factor Optimization:
0
Protection Clipping:
15 dB
Spectrum Inversion:
No
RF Output Monitoring:
Enabled
Exciter RF Failure Offset:
5.0 dB
Starting Delay
5 seconds
AGC
Off
AGC Maximum Gain
0 dB
AGC Response Time
Nominal
