ComAp InteliNano NT Plus, Reference Manual

Page: 33 / 90

InteliNano-NT Plus, SW version 2.0.1.x,
©ComAp – July 2015
33
7
Inputs and Outputs
In the table below you can see which logical function can be assigned to physical binary or analog
input or binary output. Each logical input or outpu
t function has unique code. Input code’s firs letter is
“I” output code’s letter is “O”
. Summary of all logical input function is in chapter Logical binary and
analog inputs , summary of logical output function is in Logical binary outputs .
Each logical binary input and output can be configured as
Normally Open (NO) or Normally Close
(NC)
Inputs
Terminal Type Direction Input function assignment
T07 binary input/output
I00, I01, I04, I05, I06, I07, I10, I11, I12, I13, I14, I15, I20, I22,
I24, I29
T11 binary input
I00, I01, I02, I03, I04, I05, I06, I07, I10, I11, I12, I13, I14, I15,
I20, I22, I24, I29
T12 binary input
I00, I01, I04, I05, I06, I07, I10, I11, I12, I13, I14, I15, I20, I22,
I24, I29
T13 binary/analog input
I00, I01, I04, I05, I06, I07, I10, I11, I12, I13, I14, I15, I20, I21,
I22, I23, I24, I25, I29
T14 binary/analog input
I00, I01, I04, I05, I06, I07, I10, I11, I12, I13, I14, I15, I20, I21,
I22, I23, I24, I25, I29
T15 binary/analog input
I00, I01, I04, I05, I06, I07, I10, I11, I12, I13, I14, I15, I20, I21,
I22, I23, I24, I25, I29
Outputs
Terminal Type Direction Input function assignment
T04 binary output
O00, O01, O02, O03, O04, O05, O06, O07, O08, O09, O10,
O11
T05 binary output O00, O02, O03, O04, O05, O06, O07, O08, O09, O10, O11
T06 binary output O00, O02, O03, O04, O05, O06, O07, O08, O09, O10, O11
T07 binary input/output O00, O02, O03, O04, O05, O06, O07, O08, O09, O10, O11
T08 binary output O00, O02, O03, O04, O05, O06, O07, O08, O09, O10, O11
T09 binary output O00, O02, O03, O04, O05, O06, O07, O08, O09, O10, O11
N
OTE
:
All inputs except for Fuel Level Analog , Coolant Temperature Analog and Oil Pressure Analog
can be configured to the InteliNano
NT
controller terminal number T11 , T12 , T13 , T14 , T15 and shared
input/output terminal T07 . All outputs except Starter , can be configured to terminal T04 , T05 , T06 ,
T07 , T08 and T09 . Binary output Starter can be configured only to high current output terminal T04 .