ID-Mobile Global Guide
41
5 Controller setup
5.1 Controller configuration and monitoring
5.1 Controller configuration and monitoring
InteliDrive installation package contains separate PC software tools: DriveConfig (DC) and DriveMonitor (DM).
DriveConfig and DriveMonitor is based on Windows 95/98/NT/ME/2000/XP/7 or higher platform and requires 15
MByte of hard disc free space.
5.1.1 Direct connection to the PC
ID-Mobile is usually connected with PC via RS485/USB interface or via I-LB (Local Bridge) or via IG-IB (Internet
Bridge). No RS232 or USB is available on ID-Mobile.
5.1.2 DriveConfig
There are two controller file types:
Firmware
Application file (archive)
Configuration
ID-Mobile-2.6.idc
ID-Mobile-SS-2.6.aim
ID-Mobile-AS-2.6.aim
Delivered controller contains firmware and default configuration. This configuration can be modified by customer
using DriveConfig PC software (when configuration is not locked). It is possible to download Application file
from the controller, modify it and download back. There must be corresponding version of Application file with
firmware in controller.
Note:
Any ECU Inputs/Outputs configuration procedure has to start from default AS or SS archive. The
problems can occur when the finished ECU configuration is simply changed to another ECU (e.g. from Volvo to
Scania) without ECU-1 module unselecting (unclicking).
Application (configuration) “aim” file - archive
Binary type archive “*.aim” file contains:
Complete I/O configuration (include extension modules if any)
Setpoints setting
All available languages
Configuration file can be opened (Open file or Read from controller) modified and stored to the PC (Save, Save
as) or downloaded to Controller (Write to controller).
DriveConfig functions
DriveConfig is tool for ID-Mobile and other InteliDrive controller configuration
