17
WORK
OVERFLOW DEVICE
The machine is fitted with an overflow switch that intervenes when the recovery tank
is full, causing the suction tube to close.
In this case you must empty the tank. To start working again turn the main key-
operated switch off and on again
TRACTION
This machine is equipped with electronically commanded traction, with three speeds
forwards and one backwards. To move the machine, it is necessary to turn the key
and then move the manipulator (1) forwards (forward movement) or backwards (rear
movement). Press the drive pedal and the machine will start to move. The movement
speed can be adjusted by rotating the selector.
During reverse motion, the machine emits an acoustic signal
MANUAL OPERATION
This machine is pre-set to work also in manual mode. In this case however, the rise of
the squeegee during the backwards movement must be individually activated via the
appropriate command.
ATTENTION!
During reverse movements, when working in manual
operating mode, always remember to lift the squeegee using
manipulator (1). Use switch (2) to activate manual operating mode
when moving the machine from work site to work site.
1
2
1
