Use and maintenance
Operating guidelines Clarke CA60 automatic scrubbers
1. Turn on the key and verify
there is enough battery power
to complete the work. Charge
batteries as required.
2. Install the squeegee us-
ing the thumb nuts. Attach
squeegee hose.
3. Remove the black cover on
the front and fill to desired lev-
el. Machine holds 16 gallons/61
liters maximum.
4. Check the water level indica-
tor on the right side of the
machine. Add appropriate
chemical.
5. Disc: Lift the brush/pad driver to engage the rush/pad holder
and rotate clockwise as viewed from above. BOOST: Simply press
the pad onto the pad driver face material.
6. Lower the brush deck by
pushing on the pedal to the
right and lift it up.
7. Press the OneTouch
TM
scrub
button to enable scrubbing.
The vacuum will start. Push
on one of the two switches
½ second to install the brush.
Brush will automatically install.
8. Use the squeegee raise/lower handle to
lower the squeegee to the floor.
Adjust the squeegee pitch as required.
9. Press left, right or both yellow palm
switches to move the machine forward.
12. Press the + or – solution buttons to
increase or decrease the water flow rate
and to turn water off.
10. Use the rabbit/turtle knob to control
the speed.
11. Pressing either yellow palm buttons
and the white reverse button together will
put the machine into reverse.
13. On disc machines, the brush/pad
holder can be removed automatically.
Raise the deck and press the click off brush
button.
Push
on the
button
by Nilfisk
September 2018 - Copyright © Nilfisk Group 2018 - www.clarkeus.com
Nilfisk, Inc.
9435 Winnetka Avenue North
Brooklyn Park, MN 55445
Phone: 800.253.0367
Fax: 800.825.2753
www.clarkeus.com
Nilfisk Canada Co.
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
Phone: 800.668.8400
Fax: 800.263.5111
www.nilfisk-advance.ca
