16
WORK
REGULATING THE AUTOMATIC WATER/DETERGENT DOSING SYSTEM
(OPTIONAL)
The machine is supplied with the switches (on the instrument panel) already
integrated. Two rubber caps are also supplied.
Once the regulation has been made, you can remove the knobs and cover the holes
with the rubber caps.
The left-hand knob allows you to regulate the water flow, while the right-hand one
regulates the quantity of detergent.
The scale of detergent for each of the seven positions shows two values, expressed
as percentages.
The inner scale refers to the use of concentrated detergents, while the outer scale
refers to standard detergents.
To use standard detergents, just fill the tank with detergent. To use concentrated
detergents, you must pour 1lt of concentrated detergent into the empty can, then fill it
to the top with water.
In both cases, the water/detergent quantities must be decided on the basis of how
dirty the floor is.
ATTENTION:
the CDS automatic dosing system is designed to work with
any liquid detergent. For this reason, the percentage of detergent in the
solution is subject to a maximum error of 5% compared with the nominal
value selected.
ATTENTION!
This operation must be carried out using gloves to
protect against contact with dangerous solutions.
Whenever problems arise during operation turn off the key, set the emergency
brake by pushing the lever down and pulling it towards yourself until it is
hooked in place, then quickly detach the emergency lever placed below the
operator
. These commands block all moving machine parts. To start working again,
once you have solved the problem, reconnect the connector, turn on the key and
release the parking brake pedal.
The machine will not start if the operator is not properly seated.
A “flashing zero” appears on the display when the battery charge level is getting too
low. The brush motor automatically turns off; batteries must be recharged as soon as
possible.
A residual charge remains so you can complete the drying operation and move the
machine to the recharging point
