COMAC ABILA 42, Manual, Page: 9 / 22

29
MACHINE PREPARATION
BATTERY RECHARGING
Make sure that the battery charger is suitable to the installed battery,
both in capacity and in type (lead/acid or GEL and equivalent).
WARNING! Never charge a GEL battery with an unsuitable
battery charger. Strictly follow the instructions provided by
the battery and battery charger manufacturer.
In order to avoid permanent damages to the battery, they
should never be totally discharged. To do this, they should be
recharged within a few minutes after the battery discharge
signal starts to flash.
NOTE : Never left the battery completely discharged, not even if
the machine is not being used.
WARNING! For the daily recharging of the battery it is
necessary to strictly follow the instructions provided by the
manufacturer or dealer. Specialists must carry out all installing
and maintenance procedures. Danger of exhalation of gas and
emission of corroding substances. Danger of fire: keep away
from flames.
CONNECTING BATTERY CONNECTOR
The battery connector (2) must be connected to the machine connector
(1).
2
1