32
MACHINE PREPARATION
RECOVERY TANK
Open the lid and check that plug (2) is properly anchored (it must not pull out when it is
lifted, otherwise turn it clockwise), and that suction tube (1) is inserted in its seat, in the
back of the machine, and closed.
1
2
SOLUTION TANK
Fill the solution tank with clean water at a temperature not in excess of 50
°
C. Add liquid
detergent in the amounts and using the procedures recommended by the detergent
manufacturer. Use only a minimal percentage of detergent to prevent formation of an
excessive quantity of foam, as this could damage the suction motor. Close the cap.
WARNING!
Always use low-foam detergent. Introduce a small amount of
anti-foam detergent in the recovery tank before start working, to be sure to
prevent foam formation.
Never use pure acids.
Summary of Contents for ABILA 42
Page 1: ...I pag 3 GB 23 F 43 D 63 E 83 ABILA 42 52 07 2002 Codice 75124001 R...
Page 2: ...104...
Page 22: ...42...