COMAC ABILA 42, Manual, Page: 8 / 22

28
MACHINE PREPARATION
INSTALLING THE BATTERY
Battery must be housed in the battery compartment below the recovery tank, and must
be handled using special hoisting equipment with suitable grasping systems and
designed to support the battery weight.
The battery must also conform to the requirements given in CEI 21-5 standards.
WARNING! Strictly comply with all the instructions given by the battery
manufacturer or retailer regarding battery maintenance and daily
recharging.
Specialists must carry out all installation and maintenance procedures.
Battery installation procedure:
1.
Open the recovery tank lid forward.
2.
Disconnect the squeegee cable (1) from the recovery tank.
3.
Remove the suction cap (2) by turning it in anticlockwise sense.
4.
Disconnect the “recovery tank “ outlet pipe from the proper hook.
5.
Remove the recovery tank.
2
1
6.
Place the battery.
7. Connect the battery connector (2) to the machine connector (1).
8.
Reassemble everything.
2
1
CONNECTING THE BATTERY CHARGER
The battery connector (2), in which the battery charger connector is to be inserted, is
placed under the recovery tank cap. The battery charger connector is delivered inside
the bag containing this instructions booklet, and must be fitted to the battery charger
cables according to instructions.
WARNING!
This procedure is to be carried out by specialists. A wrong or
defective connection of the cables to the connectors can cause serious
damages persons and things.
2