Page 34 of 42
INSTRUCTION MANUAL
ARI-6000-100W
RF Power Amplifier
SECTI ON 5
-
OPERATION
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV011718
5.3 Calibration
The information in the following section relates to specific technical aspects of
the Front Panel Controller and its integration into the RF Power Amplifier that is
beyond the scope of normal end-user operation. The information is provided for
the purpose of completeness of documentation and is for reference only. Refer
to Table 8 during the discussions contained in this section.
All necessary system configuration and calibration is performed at the factory
prior to shipment. Specialized skills and equipment are required to perform System
Configuration and Calibration, and Com-Power recommends returning the unit
to their facility for the performance of any such functions.
Table 8 - Calibration Mode Displays
Item
Description
Comments
Forward Power
None
Calibrate forward power detector as
described in the section below.
Reverse Power
None
Calibrate reverse power detector as
described in the section below.
Gain (VVA)
None
Calibrate Gain adjustment as
described in the section below.
View Peak Values
Forward Power
Reverse Power
Input Power
Temperature
Monitors
Allows the maximum and minimum (if
applicable) values reached to be
viewed.
Monitors
Multiple as described in the
section below.
System Info.
None
Displays system information entered by
the factory.
Exit
Save or not save settings.
