Page 11 of 42
INSTRUCTION MANUAL
ARI-6000-100W
RF Power Amplifier
SECTI ON 3
-
PRODUCT INFORMATION
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV011718
3.4 Product
Features
FIGURE 1 -
Product Features – Front Panel
Main Power Switch
1
Turns on/off amplifier system power.
AC Power Indicator Lamp
2
When lit, Indicates that the system power is ON, and power is distributed throughout the
amplifier properly.
RF Input Port Connector
3
Coaxial N-Type (female) Connector for Amplifier RF Input Port.
Air Intake Vents
4
Air intake slots for system cooling.
Amplifier Mode Control Buttons
5
These four buttons are used for selecting the amplifier’s operating mode.
Front Panel Digital Display
6
Displays the selected operating parameters during amplifier operation.
Up/Down Buttons
7
These two buttons are used for incrementing the displayed value up and down,
respectively.
Fault Indicator Lamp
8
When lit, indicates that the internal temperature of the amplifier has exceeded 80
°
C, and
that the DC bias voltage to the main amplifier modules has been turned off.
RF Output Port Connector
9
Coaxial N-Type (female) Connector for Amplifier RF Output Port.
Handles
10
Handles attached to either side of the front panel.
