Columbus step 110, Operating Manual, Page: 25 / 36

step 110
25
Before the travelling gear is drawn in, the roller of the transport trolley must
always be secured with the brakes!
After the fixing axle (31) has been inserted and secured again, the travelling gear can be
drawn in to about a third its length and the machine then swung into the maintenance posi-
tion on the trolley.
The fixing axle (31) must be secured against slipping out by means of the
supplied permanent cotter pin!
Before turning the machine remove both tanks (17; 21) and their covers (20;
28). Otherwise they can be damaged!
In this way maintenance and cleaning work can be carried out easily and quickly (see Fig.
18: Machine in maintenance position).
Figure 18 Machine in maintenance position