Columbus step 110, Operating Manual, Page: 12 / 36

step 110
12
Attention! When pushing the button the brushes start immediately to move.

Set key switch (5) to "0".

Shove in brush (1) until it hits against the right side wall.

Set key switch (5) to "1".

Move next rail completely in the opening for replacing brushes (4) (pushbutton (7)
touch operation for brush).

Set key switch (5) to "0".

Repeat this procedure until all brushes have been inserted.

Then screw on lid (3) once more.
Use only original columbus brushes: the size and shape of these have been
tested and are adjusted to fit the escalator! A set of brushes consists of brush-
es with different brush lengths, bristles and bristle materials.
Figure 2 Control panel
3.3 Filling fresh water

Unlock coupling (16) and separate from fresh-water tank (17).

Clip in the coupling into the hose braket (18).

Draw fresh-water tank forward on the side plate (19) and withdraw from machine.

Remove lid (20) and fill in a maximum of 20 litres of fresh water.

Use the cleaning in the recommended mixing proportion (see operation instructions ).
8
6
9
10
11
12
13
14
15
7
5