background image

6.0   TOWING & TRANSPORTING 

 

NOTICE: Use only straps, chains or towing devices that are rated to handle the full weight capacity of the 
vehicle in tow. 
 
Use caution and common sense while towing disabled vehicles.

 

 

6.1   TOWING YOUR VEHICLE 

 
Use a tow chain, strap or towing device long enough to provide a safe distance between vehicles. Connect the 
selected towing device to appropriate secure positions on both vehicles. 
 
Turn the key to the off position. Disengage the parking brake. DO NOT exceed 8 KPH (5 MPH) while towing. Allow 
ONLY one person in the towed vehicle to steer and apply additional braking, as necessary. Tow only one vehicle at a 
time unless a multiple vehicle towing bar system is used. Avoid sudden stops, sudden starts and sharp turns while 
towing. 

 

6.2   TRANSPORTING YOUR VEHICLE 

 

NOTICE: Never tow a vehicle behind an auto or truck unless on an approved trailer.

 

 

When trailering your vehicle over long distances or on the highway observe the following: 

  Use trailers specifically designed to carry your Columbia ParCar vehicle that meets all federal, state and local 

requirements. 

  Secure vehicle to the trailer following trailer manufacturer’s instruction. 

  The key should be removed from the vehicle, the parking brake firmly locked, and the wheels blocked. 

  On vehicles equipped with high or wide additions or accessories be certain they are secured properly to prevent 

loss or damage while trailering. 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

2012 Summi

6-1 

Summary of Contents for Summit






























Reviews: