background image

34

08.08.08

For equipment purchased in Canada only.

THREE YEAR LIMITED WARRANTY

The limited warranty set forth below is given by MTD Products Limited with respect to new merchandise purchased and used in Canada and/or 
its territories and possessions (either entity respectively, “MTD”).
MTD warrants this product (excluding its normal wear parts as described below) against defects in material and workmanship for a period 
of three (3) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be 
defective in materials or workmanship. This limited warranty shall only apply if this product has been operated and maintained in accordance 
with the Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, commercial use, neglect, accident, improper 
maintenance, alteration, vandalism, theft, fire, water, or damage because of other peril or natural disaster. Damage resulting from the installation 
or use of any part, accessory or attachment not approved by MTD for use with the product(s) covered by this manual will void your warranty as 
to any resulting damage. 
Normal wear parts are warranted to be free from defects in material and workmanship for a period of thirty (30) days from the date of purchase. 
Normal wear parts include, but are not limited to items such as: batteries, belts, blades, blade adapters, grass bags, rider deck wheels, seats, 
snow thrower skid shoes, friction wheels, shave plates, auger spiral rubber, tires, engine oil, air filters and spark plugs. 
HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF PURCHASE, through your local authorized service dealer. To 
locate the dealer in your area contact MTD Products Limited, Kitchener, ON N2G 4J1, or call 1-800-668-1238 or log on to our Web site at www.
mtdcanada.com. 
This limited warranty does not provide coverage in the following cases: 
a.  The engine or component parts thereof. These items may carry a separate manufacturer’s warranty. Refer to applicable manufacturer’s 

warranty for terms and conditions. The Powermore engine is not excluded under this agreement.

b.  Log splitter pumps, valves, and cylinders have a separate one-year warranty. 
c.  Routine maintenance items such as lubricants, filters, blade sharpening, tune-ups, brake adjustments, clutch adjustments, deck adjustments, 

and normal deterioration of the exterior finish due to use or exposure. 

d.  Service completed by someone other than an authorized service dealer. 
e.  MTD does not extend any warranty for products sold or exported outside of Canada, including possessions and territories.
f.  Replacement parts that are not genuine MTD parts. 
g.  Transportation charges and service calls. 
h.  If Products are used commercially.  (MTD may separately offer Limited Commercial Warranties on certain select products. Ask your dealer or 

retailer for details or contact MTD Service for more information.)

No implied warranty, including any implied warranty of merchantability of fitness for a particular purpose, applies after the applicable 
period of express written warranty above as to the parts as identified. No other express warranty, whether written or oral, except as 
mentioned above, given by any person or entity, including a dealer or retailer, with respect to any product, shall bind MTD. During the 
period of the warranty, the exclusive remedy is repair or replacement of the product as set forth above. 
The provisions as set forth in this warranty provide the sole and exclusive remedy arising from the sale. MTD shall not be liable for 
incidental or consequential loss or damage including, without limitation, expenses incurred for substitute or replacement lawn care 
services or for rental expenses to temporarily replace a warranted product. 
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty 
lasts, so the above exclusions or limitations may not apply to you. 
In no event shall recovery of any kind be greater than the amount of the purchase price of the product sold. 

Alteration of safety features of the 

product shall void this warranty. You assume the risk and liability for loss, damage, or injury to you and your property and/or to others and 
their property arising out of the misuse or inability to use the product. 
This limited warranty shall not extend to anyone other than the original purchaser or to the person for whom it was purchased as a gift. 

HOW LOCAL LAWS RELATE TO THIS WARRANTY: This limited warranty gives you specific legal rights, and you may also have other 

rights that vary in different jurisdictions. 

IMPORTANT: Owner must present Original Proof of Purchase to obtain warranty coverage.

MTD Products Ltd., P. O. BOX 1386, KITCHENER, ON N2G 4J1; Phone: 1-800-668-1238

Summary of Contents for 79G Series





































Reviews: