SC Scanner Instruction Manual
Page 20 of 23
4
Calibration
1. Open the Lid Assembly and
clean the SingleSensor
Glass Sub-Assy. Close the
Lid Assembly.
2. Insert the Calibration Target
so that the black part
section is inserted first, face
up.
NOTE: It is necessary to remove the
Magnetic Paper Guide AND the Document
Return Guide (if it is fitted to the scanner) so
the target can pass through the scanner
without catching.
3. Double click the SmartLF
SC Utilities icon.
4. On the front page, click the
‘Calibrate’ button.
