SC Scanner Instruction Manual
Page 10 of 23
19. Rotate the Control Board
Bracket Assembly to gain
access to the Control Board
and cables.
20. Disconnect the 4 x Paper
Sensor Cables and the
Control Board Cable from the
Main Board. Remove the
Control Board Bracket and
store safely until refitting.
21. To raise the lid into the
maintenance position,
remove the 3 x M5 screws
holding the left end Gas
Piston Bracket to the Lid
Assembly, making sure not to
drop them into the scanner.
22. Remove the 3 x M5 screws
holding the right end Gas
Piston Bracket to the Lid
Assembly making sure not to
drop them into the scanner.
NOTE: The End Covers do not need to be
removed.
