background image

Colortrac Flatbed Operator Manual.

12

10 DECLARATION OF CONFORMITY

Manufacturer:

Colortrac Ltd
Kings Hall
St Ives Business Park
St Ives
Cambridgeshire, PE17 4WY
United Kingdom

Details Of Electrical Equipment

Model Number:

Colortrac Flatbed 24120

Description:

Large Format Colour Document Scanner

Directives this equipment complies with:

LVD 73/23/EEC
EMC 89/336/EEC
CE Marking 92/31/EEC

Harmonised standards applied in order to verify compliance with Directive:

BS EN60950:1992
EN55024-1:1998
EN61000-3-2:2000 Ed.2
EN55022:1998 +A1 Class A:

This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures
(see Note1).

Other Standards Applied

CFR47:2002 Class A

Test Report Issue by : dB Technology
Year in which CE mark was affixed:

2003

Issued: 

24th April 2003

                 

  

Signed 

..........................................

Graham Tinn
Managing Director
ACTion Imaging Director

Note

:

 The “domestic environment” is classed as an environment where the use of

broadcast radio and television receivers may be expected within a distance of 10 metres
of the apparatus concerned.

Summary of Contents for Flatbed 24120














Reviews: