Colortrac Flatbed Operator Manual.
8
5 MAINTENANCE
5.1 Left/ Right and Front/ Back Stitch
Unlike the previous Colortrac models, the Flatbed 24120 doesn't have an auto-stitch.
Therefore a manual stitch procedure is required. Place stitch target on scanner face down
with bottom edge of target nearest narrow black strip of glass.
Using ScanWorks, under the 'Data Control' tab, run the manual stitch. Pressing the 'Scan'
button will automatically scan the target, displaying the image in ScanWorks. Zoom into
the centre triangle by holding left click down while drawing box around the required area.
Look at the stitch points between the two cameras. If a discrepancy is see adjust the
values by moving the slider in either direction, remembering to adjust Front/ Back stitch
values first. Then re-scan to see what difference has been made.
Stitch target.
Decrease Cam1
Or increase
Cam2 FB value
Good Stitch.
Increase Cam1
Or decrease
Cam2 FB value
Increase Cam1
Or decrease
Cam2 LR value
Decrease Cam1
Or increase
Cam2 LR value
