Page
16
of
39
SubliXpress Plus
6. Getting Ready for Printing
Switch ON Procedure
Note: Don’t switch OFF
the machine input power from the main power board and
machine’s MCB.
Follow these steps to switch ON the printer:
Step 1:
Check Waste Bottle.
Step 2:
Check Ink Level.
Step 3:
Maintain the room temperature.
Step 4:
Move the carriage manually away from the Home
position.
Step 5:
Turn ON the Power ON/OFF button to on the printer
from the Control Panel.
Fig 15: Displaying the Power ON/OFF Button
Step 6:
Load the media.
Step 7:
Turn on the computer system and open the printer manager software.
Step 8:
Check the print head nozzles status by issuing the Nozzle Test command. If nozzle test result is not OK
or nozzles are blocked, clean the Print Head by performing the steps given in the
Head Cleaning
section.
Step 9:
Rip the image file using the Ripping software provided with the machine.
Step 10:
Set the print origin to specify the printing starting position.
Now, the printer is ready for printing.
MCB
Fig 14: Displaying the MCB
