Page
37
of
40
SoniQ i
11. Troubleshooting
PRINTER NOT INITIALIZING
•
Encoder scale is having ink stains (print shows vertical color bands)
•
Encoder sensor is not cleaned
•
Emergency button is pressed
PRINTER MANAGER NOT SHOWING “READY”
•
USB cable is not connected to the computer or loose
•
USB cable is faulty
PRINT STOPS IN BETWEEN PRINTING
•
USB cable is loose or faulty
•
Open heavy file that can slow down the data transfer
•
Ground wire is disconnected
•
Encoder scale is having ink stains
•
Pulley or belt is slipping
•
Ripped file is having error
PRINT MARGIN IS SHIFTING, OR JUNK PRINTING
•
Encoder scale is having ink stains
•
Encoder sensor is not clean
•
Pulley or belt is slipping
•
Data cable is faulty
PRINT IS BLUR (NOT SHARP)
•
Improper printer calibration
–
bi-directional and step
•
Improper head mounting and calibration
•
Selection of incorrect resolution (dpi)
LINES IN PRINT
•
Head nozzles are blocked
•
Incorrect step calibration
HEATERS NOT WORKING
•
Check if inlet power cord is connected
•
Check the set temperature in the controller
