Page
16
of
42
SoniQ HQ Plus
Step 13:
Set the print origin to specify the printing starting position.
Now, the printer is ready for printing.
Loading Media
Follow these steps to load the media:
Step 1
: Lift up the Media Lever, as shown below:
Fig 15: Displaying the Media Lever
Step 2
: Unwind the media roll to reach near the platen and hold it.
Step 3
: Insert the taken-out media between the platform and the pinch roller.
Step 4:
Pull the media out in front of the machine.
Step 5
: Holding the media firmly and push down the Media Lever.
Step 6:
Turn on the Supply Auto/Supply switch in auto mode and carefully observe the direction of media either
reverse or forward.
Step 7
: Install the media clamps from both ends, as shown below:
Fig 16: Installing the Media Clamp
