Page
12
of
42
SoniQ HQ Plus
o
Placement
: Enable or disable the color bar and its placement viz. left, right, or both.
o
Height same with image
: If enabled, the height of the color bar is same as the image height.
•
Spray setting
o
Auto Spray
: Set the duration (number of passes) for auto spraying.
o
Spray Period
: Define the duration for spraying (set as 100). If the duration increased, spray
frequency gets decreased.
o
Print Pre-spray Time
: This is the duration of spray before start of print.
This option works when the
Spray Before Print
option is enabled.
o
Idle Spray
: Spray during carriage at home position. This option must be enabled.
o
Spray Before Print
: This option enables spray before start of print.
The
Move
tab is shown in the image below:
Fig 9: Displaying the Move Tab
Note:
X and Y manual moving speed can be selected using the Move tab.
