Page
24
of
47
NEPTUNE HQ
o
Height same with image
: If enabled, the height of the color bar is same as the image
height.
•
Spray setting
o
Auto Spray:
Set the duration (number of passes) for auto spraying.
o
Spray Period:
Define the duration for spraying (set as 180). If the duration increased, spray
frequency gets decreased.
o
Print Pre-spray Time:
This is the duration of spray before start of print.
o
Idle Spray:
Spray during carriage at home position. This option must be enabled.
o
Spray Before Print:
This option enables spray before start of print.
The
Move
tab is shown in the image below:
Fig 32: Displaying the Move Tab
Using the
Move
tab, the Y Speed can be updated as per the requirements.
The
Preference
tab is shown in the image below:
Fig 33: Displaying the Preference Tab
