Page
15
of
47
NEPTUNE HQ
Step 5:
Fix both screws (
3x16 mm screws
) gently on the Print Head, as shown below:
Fig 16: Fixing the Head Screws
Step 6:
Fix the
Ink Sub Tank
pipe into the other end, as shown below:
Fig 17: Connecting the Ink Sub Tank Pipe
Step 7:
Remove the cap of the
Air Releasing Pipe
(Refer to Fig 17).
Step 8:
Hold the
pipe down
and press the
Purging
button of a particular color, as shown below:
Fig 18: Displaying the Air Releasing Pipe and Purging Button
Note:
Carefully perform the above step to avoid the chances of ink spilling.
Purging Button
