Attention: It is import to read this manual before you install or use this product.
OPERATION
ORBIT TP
•POWER
ON
/
OFF
(
1
)
Power
ON
/
OFF
Press the circle with [ON/OFF] letter on the panel to turn the unit ON/OFF.
The display will fade out when turning off the device. When the device is turned
on,
『
---
』
will be displayed and it will start in the last used mode.
(
2
)
Memory function
Memory function: The controller will automatically memories the last setting when
turn off the unit and will continue to perform when turn on the unit again.
•CHANNEL MODE SETTINGS
(
1
)
Orbit TP is suitable for single color (1CH) / tri-color (RGB)(3CH) / four-color
(RGBW) (4CH) fixtures. Please kindly note that the channels need to be set
accurately before operations.
(
2
)
Setting
Press [RGB] and [WHITE] on the device (panel) together and select the channels
by slider while the device is turned off. The display will show
『
---
』
after finished
the setting. After finished the setting, touch the button [ON/OFF] to start operating
the device.
1 Color CH Mode
4 Color CH Mode
Channel
Mode
1CH=W
1CH=W, 2CH=R, 3CH=G, 4CH=B
First Light
1CH=R, 2CH=G, 3CH=B
3 Color CH Mode
•
RESET
(
1
)
This function is for user to reset to original setting from factory.
Make sure the panel device is in OFF
condition and the display shown
『
---
』
.
Touch and hold the [BRIGHTNESS] and [SPEED] together until
『
---
』
vanish and
the display show
『
C01
』
. When see the display show
『
C01
』
means the
resetting is success.
(
2
)
Original setting
MODE: 4CH
COLOR: C01
FADING: F01
RGB: 000
WHITE: 000
BRIGHTNESS: 255
LGHTS: 12 nos
C1: Red
C2: Green
Note: T-021 can not operate the reset function.
www.colorbeam.com
7
