Colorbeam ORBIT TP, User Manual

Page: 11 / 12

•SPEED
(
1
) In
FADING
mode, it can adjust from value 1-10 for the desired color.
(
2
) For a quick change of the speed in
FADING
mode, the colors can be
adjusted by gliding the slider on Orbit TP.
•BRIGHTNESS
(
1
)
For a quick change of the brightness in COLOR and FADING mode, the colors can
be adjusted by touching the slider on Orbit TP.
NOTE: In FADING mode, the lowest brightness value can only be adjust to the 100.
3 COLOR CHANNEL MODE
(
1
)
In 3 color channel mode, only WHITE can't be display. The other functions are the
same as 4 Color channel Mode.
1 COLOR CHANNEL MODE
(
1
)
In 1 color channel mode, only the slider can adjust BRIGHTNESS .
『
---
』
will be
shown when press other button.
T-021
Press the button
「 」
to turn on/off the device.
1
、
Press
「 」
to see the present channel mode.
2
、
To adjust the channel mode, press
「 」
and hold the buttom still for 3 seconds until
the display flickering then select the channel mode. After finished setting, press
「
」
to operating the device.
Press
「 」
and
「 」
to select the fading mode.
Press
「 」
and
「 」
to select the fixed color.
Press
「 」
and
「 」
to adjust the fading speed.
Press
「 」
and
「 」
to adjust the brightness.
When the device is power off, press
「 」
or
「 」
buttom to change the numbers of the
light address group. Press
「 」
after finished setting.
ORDER INFORMATION
OPERATION &
SPEC.
GOBC0111
CONTROLLER
1M
SPEC.
D03-994001-002
ITEM PART NUMBER
ACCESSORY
ITEM PART NUMBER
4-PIN CABLE for ORBIT Series
ORDER INFORMATION FORM
------
ORBIT TP
ORBIT T021
B030210001
------
10
www.colorbeam.com