7
manual mode. To reactivate timer, press Timer
,then up
or down
arrows.
Time will increase or decrease in 3-second intervals.
For speed adjust operation, press speed
from 1 to 8 gears speed. When pressing
speed
, the LED screen will show “1”, which indicates the lowest speed, and press up
or down
arrows. Speed will increase from 1 to 8 gears, or decrease from 8 to 1
gears. When finished blending, press ON/OFF
. For momentary operation, press the
PULSE
button. Motor will run on highest speed until the button is released.
6. NOTE: The Electronic Blender is with slowstart feature, when pressing ON/OFF
, and
ok
, the unit will start in the lowest speed for 3 seconds and then switch to highest
speed, the default time is 180 seconds when not using Speed
and Timer
button.
7. Allow to remove the jar from the motor base while motor is running, the switch will shut off
automatically, put the jar back to motor base until the drive stop moving completely.
Wash and dry container after each use. See Care & Cleaning instructions.
8. To turn the unit off, press ON/OFF
button. Red LED light will go off.
Reprogrammable
Settings
for
Electronic
Touchpad
Control with Timer
1. Before starting, make sure that the blender is unplugged and container is not positioned on
the blender.
