www.coloradotime.com
5
•
Connect the start system to a deckplate using an R-SJ-xx cable for the starter
connection and an R-LSI-xx cable for the speaker.
•
Connect the start system to the start input on the start pod of a primary cable harness
using one R-SJ-xx
Connect Interface Computer to Timer
The Gen7 timer requires a laptop (or desktop) PC to run the control
interface. The interface computer and timer must be connected to
the same network. The Gen7 Timer supports an Ethernet
connection. The interface computer can be connected to the network
via a cabled Ethernet connection or Wi-Fi. The timer and interface
computer can also be directly connected with a single Ethernet cable.
Other Connections
Connect other equipment such as touchpads, pushbuttons and relay judging platforms to the
deckplates or harnesses at each lane. Use the Diagnostics function (see page 10) to quickly
confirm that all equipment is in the correct location and plugged in
.
Ethernet
