Collomix GmbH
Shaker
AGIA 200, VIBA 300 & VIBA 330
D-85080 Gaimersheim
Version G 1.4-16
11
5.2.2
Remove transport lock
To protect the mixing unit from damages during transport, it is secured with a lashing belt, which
goes over the mixing unit. The belt must be removed prior to switching on the machine:
To release, pull the slider and move the lever by approx. 180°
to the stop.
The pre-tensioning force is released immediately.
The strap is hooked into the
attachment points in the
machine.
5.3
Set-up the equipment
When setting up the machine, the applicable electrical requirements and the additional information
in this Operating Instructions must be followed.
The machine is delivered on a wooden pallet packaged in recyclable cardboard. Check the packaging
immediately upon receipt and the equipment when unwrapping it for any visual external defects.
Keep all parts of the original packaging for a possible necessary return.
Remove the machine from the pallet with a suitable lifting tool and place it on solid and level
ground.
In general, the machine does not need any fine adjustment because of its 3 legs. If necessary, you
can adjust any unevenness in the floor with the height-adjustable legs.
Do not operate the machine on the shipping pallet or on any other suitable sub-surfaces.
5.4
Trial run
A trial run with an empty mixing container must be conducted when first starting the machine or
after maintenance and repair work in order to check the proper function of the machine.
WARNING
Risk of injury due to protruding parts
Parts may protrude from the equipment.
•
Always work diligently on the equipment and in close proximity of the equipment.
•
If the machine is not used and turn it off on the main switch.
Machine legs
