Safety
15
2.5 Industrial safety and special hazards
In the following section the residual risks will be stated, which
result from the risk analysis.
Observe the safety information and the warnings in this and other
chapters in order to reduce hazards to health and avoid hazardous
situations.
Warning symbols on the machine
The particular danger areas on the machine are indicated by these
symbols:
DANGER!
Danger of death due to electrical current!
… indicates situations with danger of death due to
electrical current. If the safety information is not
observed, there is danger of death or serious
injury.
The work should only be performed by a
qualified electrician.
WARNING!
Danger of crushing!
During operation, moving components and objects
may cause crushing with very serious injuries and
permanent physical damage.
Therefore:
– Do not enter the danger area while the machine
is in operation.
– Adjustment and maintenance work, as well as -
measures to remedy faults must always be
carried out with particular care and attention
with regard to crushing.
– Personal protective equipment for protection
against crushing must be worn for all work.