![background image](http://html1.mh-extra.com/html/coline/pc323/pc323_instruction-manual_2637233005.webp)
4. Start using the Popcorn Popper
1. Place the Popcorn Popper on an even, heat-resistant surface.
. Pour one teaspoonful of vegetable oil and a suitable amount of popcorn (max
70g) on the popping surface(3). Never use more popcorn or oil than what is
recommended! Spread the popcorn evenly over the non-stick coated popping
surface.
3. Place the bowl (5) on top, check that the handles (7) and (8) fit into each other.
4. Remove the lid (4).
5. Plug in the appliance to a socket and flip the switch (1). The indicator light will
light up when the switch is switched on.
6. Turn off the Popcorn Popper by flipping the switch after 3 – 5 minutes, and
unplug the mains cord once the “popping” has finished.
7. Put the lid (4) back on the bowl (5), hold the handles and turn the Popcorn
Popper upside down, so that the content is collected in the bowl. Add salt
according to taste, and serve.
Warning! Remember that the base of the Popcorn Popper can get very hot
when the appliance is used. Be careful, you risk getting burned!
Note: The popcorn machine is not intended for continuous use.
The
machine may only be used for 15 minutes in a row; it must then be turned off for
about 0 minutes, to allow it to cool off before the next period of use.
5. Cleaning
• Unplug the mains cord and let the Popcorn Popper cool off completely before
cleaning.
• Wipe off the Popcorn Popper using a dry cloth. If there are grease spots on the
non-stick coated popping surface (3), they can be wiped off using a cloth slightly
moistened with warm water and washing-up detergent. Check that the Popcorn
Popper is completely dry before putting it away.
• Never use strong cleaning agents or solvents!
• To clean the stirring rod: Unscrew the centre nut counter-clockwise, remove the
stirring rod () and wipe it off, replace the stirring rod (make sure that it is placed
correctly in the groove on the rotating shaft) and tighten the centre nut.
• Never immerse the appliance in any fluids.
•
After long use, the non-stick coated popping surface (3) might get
discoloured:
Wipe the surface with a cloth slightly moistened with vinegar or
a weak citric acid solution. Then wipe with a cloth only moistened with clean
water. Check that the appliance is completely dry before putting it away.
EN
G
LIS
H