ENGL
IS
H
4
Tare feature
Note:
The volume readings for ml and fl oz are calibrated for water and other liquids
weighing 1 g/cm³ (1 g weight equals 1 ml volume). If you weigh milk, for example, you
should account for 5 % deviation.
This function is useful for bakers who want to put all their ingredients in the same
container.
1. Press [ TARE/+ ] to reset the scale to
0
.
2. Place the ingredients in the container, the display shows the weight of what has
been put in.
3. Repeat the procedure to add more ingredients to the container.
Temperature display
When the scale has just been switched on and when it is not being used,
the temperature is displayed at the top of the display screen.
Clock
When the scale has just been switched on and when it is not being used, the time is
displayed on the display screen.
Setting the clock:
1. Hold in [ TMR ] for approx 3 seconds.
2. The hour display will begin to flash.
3. Set the hours using [ TARE/+ ] and [ MODE/- ] to adjust, confirm by pressing [ TMR ].
4. Set the minutes using [ TARE/+ ] and [ MODE/- ] to adjust, confirm by pressing [ TMR ].
5. Press [ TMR ] once more when the time has been set and it will be displayed.
Switching off
The scale will turn off automatically after about 60 seconds.
Note:
The scale always displays the time and temperature.
Overload indicator
When the scale is overloaded with a weight exceeding 5 kg, “O-Ld” will appear on
the display. Lighten the load on the scale so that the weight capacity is not exceeded.