14. BATTERY
1. Set the battery in its holder.
2. Install the battery vent tube. It must be free from obstructions
and securely installed. If not, battery gases could accumulate
and cause an explosion. The tube should be routed away
from the frame and body to prevent corrosion. Avoid skin
contact with electrolyte, severe burns could result.
3. First connect and tighten the red (positive) cable.
4. Second connect and tighten the black (negative) cable.
5. Reinstall battery cover and attach the hold down strap.
6. Verify that cables are properly routed.
NOTE:
l
When you ATV is placed in storage for one months or more,
the battery should be removed, charged to proper level, and
stored in a cool dry place.
l
Before reusing, take the battery to your dealer for testing and
recharging.
l
When installing a new battery, make certain it is fully charged
prior to it is initial use. Using a new battery that has not been fully
charged can damage the battery resulting in a shorter life of the
battery, It can also hinder vehicle performance.
CAUTION
Your ATV is equipped with a 14Ah Battery. This may no be
sufficient to provide power for optional equipment. When
installing optional equipment please upgrade your battery as
necessary. See your dealer for the proper battery.
68
Summary of Contents for xt260
