background image

3

Raise Ends of Tent

– Insert one end of the Side Frame Pole

onto the Pin & Ring System.

– Repeat for other Side pole.
– Go to opposite end of pole and

gradually apply pressure until pole
arches enough to fit onto Pin. 

– Attach Frame clips.

4

Attach Rainfly 

– Assemble rainfly poles by

interlocking shock-corded poles.

– Insert rainfly poles into pole

sleeves located at the center 
edges of the underside of rainfly.
(illus. 7), (illus. 8)

– Drape rainfly over tent, pole side 

down. The rainfly poles should 
be over the doors of the tent.

– Insert the ends of the rainfly poles

into the grommets on the tent body.

– Secure the underside of the rainfly

to the tent poles.

– Connect the elastic loops 

with “S” hooks (found at the 
rainfly corners) to fabric loops 
near frame clips.

– Attach guylines to fabric loops on

rainfly. Two at each end over side
windows and four on the rainfly.
Stake out guylines away from the
tent at an angle. (illus. 9)

illus. 6 

Assembled tent without Rainfly. Note

the Frame Clips located 

on tent. 

illus. 5

Frame Clips

illus. 8 

Completed tent with rainfly. Note the 2 guy
lines on each end and 4 main guylines.

Side pole

Side pole

End 

guylines

End guylines

4 Main guylines attach to
fabric loops on rainfly.

Frame ties located on
under side of rainfly.

illus. 9 

Stake out tent with adjustable guylines. Slide

the disc up the rope to tighten guyline.

illus. 7 

Insert rainfly pole through

pole sleeve on underside of rainfly.

PRINTED IN CHINA

Rev. 7/04

Things You Should Know

• 

Under certain conditions (cold weather, high humidity, etc.) 

condensation will form on the inside surfaces of your tent. Condensation is
caused by water vapor from your breath, perspiration, or any wet clothing
inside your tent. It is NOT LEAKAGE through the tent fabric. It can be
minimized by removing wet clothing from your tent and by providing good
ventilation through the tent.

• 

Never store tent, even for a short period of time, without drying it

thoroughly and brushing off caked dirt. Do not pack stakes or poles inside
your tent. Use separate storage bag.

• 

STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF.

NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO
REMOVE STAKE.

• 

TENT POLES SHOULD NOT BE LEFT TELESCOPED

TOGETHER DURING STORAGE.

• 

Seam sealer has not been provided with your tent. For additional protection

we recommend seam sealing your tent prior to camping. Seam sealer may be
purchased through your local retailer or at your local sporting goods store.

• 

Do not leave your tent set-up for weeks at a time, be aware that

exposure to the ultraviolet rays of the sun can seriously damage nylon
material and/or cause it to become discolored.

WARNING: KEEP ALL FLAME AND HEAT SOURCES 
AWAY FROM THIS TENT FABRIC. This tent meets the flammability
requirements of CPAI-84.The fabric will burn if left in continuous
contact with any flame source.The application of any foreign substance
to the tent fabric may render the flame-resistant properties ineffective.

THE COLEMAN CO., INC.

3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278  •  www.coleman.com

MADE IN CHINA

Grommets for rainfly poles

Reviews: