17
18
FUNCTIONAL DESCRIPTION
INSTALLING & REMOVING THE BATTERY FROM THE TOOL
Figure B
Figure C
OPERATING INSTRUCTIONS
HOLDING THE RECIPROCATING SAW
• Place blade and shoe lightly against work
to be cut.
• Switch on saw motor and allow it to
obtain maximum speed before applying
pressure.
• Always hold saw firmly with both hands
while cutting as shown in
figure D
.
Whenever possible, the saw shoe must be
held firmly against the material being cut.
This will prevent the saw from jumping
or vibrating and will minimize blade
breakage.
Figure D
Handle Grip
Handle
Grip
WARNING
Make certain the lock-off button is engaged to prevent switch actuation before removing
or installing battery.
WARNING
Always use proper eye protection that
conforms to ANSI Z87.1 (CAN/CSA
Z94.3) while operating this power tool.
TO INSTALL BATTERY PACK:
Insert battery pack into tool until an audible
click is heard
(figure B)
. Make sure battery
pack is fully seated and fully latched into
position.
TO REMOVE BATTERY PACK:
Depress the battery release button and pull
battery pack out of tool
(figure C)
.
8
9
1
6
3
4
5
2
7
1. Trigger Switch
2. Safety Button
3. Shoe
4. Blade Clamp Release Lever
5. Blade
6. Main Handle
7. Secondary Gripping Handle
8. Battery Pack
9. Battery Pack Release Button
NOTE:
Before cutting any type of material,
be sure it is firmly anchored or clamped to
prevent slipping.
Model No. 500118
RECIPROCATING SAW SPECIFICATIONS
Stroke Per Minute .................................... 0~3000 SPM
Length of Stroke .................................................... 6/7 in.
Blade Length ....................................................... 5-7/8 in.
Motor .......................................................... 20V DC Motor
Switch ....................................................... Variable Speed
Charging Voltage .............................. 120V / 60 Hz AC
Charge Rate ................................. 1 hour Fast Charging
