4-10
Cole Palmer
Section 4 Operation
Interfaces
is used to enable/configure the optional serial communications feature.
Set Clock
is used to set the controller's time
(hr : min : sec) and date (year - month - day).
On/Off Timer
is used to enable and set the
controller's timer.
Serial Type
Protocol
Baud
Parity
Menu
I: 2010-01-01 08:00:00
O: 2010-01-01 08:00:00
Enable
Menu
XX : XX : XX
XXXX - XX - XX
Menu
1.
With
Interfaces
highlighted, press
to
display the list of parameters.
Highlight the desired parameter and press
to view the available options.
1.
With
On/Off Timer
highlighted, press
to display the on (
I
) and off (
O
) time as well as
the enable box.
Available options:
Serial Type
USB, Off
Protocol
Standard, NC
Baud
19200, 9600, 4800, 2400, 1200,
600, 300
Parity
None, Odd, Even
Data Bits
8, 7
Stop Bits
1, 2
See the Appendix for additional information.
After setting the on and off times select
Enable
to activate the timer.
Auto Restart
is used to enable the auto restart feature. When enabled, the unit will automatically
restart after a power failure or power interruption condition.
Energy Saving
is used to enable the energy savings mode. The Energy Saving mode is primarily
designed for applications running under a stable load. Enabling the mode saves energy by reducing the
unit’s heater power and cooling requirements. This can result in substantial energy savings over the life
of the unit. The default setting is
ON
.
1.
With
Auto Restart
highlighted, press
to toggle between enable and disable.
1.
With
Energy Saving
highlighted, press
to toggle between enable and disable.
