1. Open the Pump Head to drive.
NOTE:
On 07525-20 and 07525-40
only, opening the Pump Head while the drive is powered will display a
pump open warning. If the drive is running it will stop the drive. Press
the start key or activate the START/STOP remote contact to restart
the drive.
2. Insert appropriate tubing into Pump Head.
3. Insert tube inlet into supply fluid.
4. Insert tube outlet into desired container.
5. Press and hold the UP and DOWN keys simultaneously, this will
activate the prime function on the drive console to prime the pump.
Priming will stop when keys are released.
CAUTION: Keep fingers away from rotor while pump is in
operation. Stop pump before loading or unloading tubing.
MASTERFLEX
®
Digital Pump Drive Operating Manual 3-3
Cole-Parmer
Section 3
Operation
Priming the Pump
