26
Prior to draining the last time, brush clean all
surfaces of the mix storage tanks with the cleaning
brushes provided with the freezer.
Drain the remaining water and soap solution from
the freezer.
You are now ready to disassemble and clean your
freezer. Please refer to Part III – Initial Cleaning
Procedure of this operation manual for instructions
on how to proceed.
!! IMPORTANT !!
You MUST disassemble the machine after
draining and follow the described cleaning and
sanitizing procedures as described in this
operation manual in order to maintain acceptable
hygienic levels in your product.
571.2
B) Pump Fed Machines
With frozen mix in the cylinders, select the Beater
mode on the front touch pad by pressing the Push
to Select button (#571.2) until pilot light #L4
illuminates. Allow the machine to operate in the
beater mode for 4 to 5 minutes. This will soften the
product and allow for easier product removal.
Place a pail under the dispensing head, holding it
up against the bottom of the head as high as
possible and slowly pull the two end dispensing
handles. This will allow the mix to drain from the
machine.
After the frozen product is removed and liquid mix
is dispensing from the machine, press the Stop /
Reset button (#571.1) on the touch pad. Placing
the machine in the OFF mode, close both of the
dispensing handles. Slowly push in on the pressure
relief plungers to remove any remaining pressure
from the cylinders.