EPS XP
- 23 -
eps xp_EN - 09/10 - ed. 2
5. CLEAN OUT, DISASSEMBLING AND
REASSEMBLING OF PARTS IN CONTACT WITH
PRODUCT
IMPORTANT
Cleaning and sanitizing must be carried out at the end of every working day with utmost
care in order to guarantee quality of production in the respect of all hygienic rules.
5.1 EXTERIOR CLEAN OUT
Eliminate dust from your machine and also the protective film which, before delivery, it was
covered with.
Use water, only, with addition of a mild soap-detergent and a soft coth, if need be.
WARNING
Do not use solvents, alchools or detergents that can damage the machine parts or
pollute those parts involved in the production.
5.2 PRELIMINARY CLEAN OUT
With machine off and
STOP
led on, make sure that the mix dispensing tap is closed; pour
thence water into the tank, according to the quantity necessary for the machine wash, by
pressing "
shower
" push-button and ajusting the wash nozzle.
Press the "
beating
" push-button and leave in that position a few minutes.
Press "
stop
" push-button.
Drain all water from the tank through the mix dispensing spigot.
Disassemble then the machine by removing its parts.
5.3 DISASSEMBLING THE SPIGOT PISTON
Disassemble the spigot by turning the knob (pos. 450) anticlockwise and keeping the plug
(pos. 924).
Also remove all other spigot parts.
Thoroughly wash all parts in water with a sanitizing solution and the brush in your kit,
then rinse.
Reassemble the whole.
450
924