EPS XP
- 17 -
eps xp_EN - 09/10 - ed. 2
3. INSTRUCTIONS FOR USE
3.1 MACHINE SAFETY WARNINGS
When using industrial equipment and plants, one must be aware of the fact that drive
mechanisms (rotary motion), high voltage components, as well as parts subject to high
temperatures may cause serious damages to persons and things.
Who is in charge of plant safety must be on the look-out that
- an uncorrect use or handling is avoided
- Safety devices are neither removed nor tampered
- Only are original spare parts to be used especially as far as those components with
safety functions are concerned (ex.: protection microswitches, thermal relays).
To achieve the above, the following is necessary:
- At working place an instruction manual relevant to the machine should be available.
- Such documentation must be carefully read and regulations must consequently be
followed.
- Only must adequately skilled personnel be assigned to electrical equipment.
3.2 MACHINE CONFIGURATION
The machine consists of a transmission of movement for beater assembly, a heating and
cooling system with aircooled or watercooled condenser.
The product is prepared by pouring a mix into the tank and starting the production cycle,
while referring to minimum and maximum quantities reported in Section 1.
When the cycle ends, the product can be taken out from the special spigot.
Mix
End product