Cold Jet AERO2 PLT 60 Operator'S Manual Download Page 47

   41

EU Declaration of Conformity

 

Original EN

 

This declaration is issued under the sole responsibility of the Cold Jet group:

 

Cold Jet, LLC

 

455 Wards Corner Road

 

Loveland, Ohio 45140 USA

 

Hereby declare the following product:

 

Product Designation:

AERO2 

PLT

 

60 

Type/Serial Number:   XXXX

 

Is in conformity with the Council Directives:

 

Directive 2006/42/EU Machine Directive

 

Directive 2014/30/EU EMC Directive

 

Directive 2014/35/EU Low Voltage Directive

 

Directive 2011/65/EU ROHS Directive

 

Directive 2014/53/EU Radio Equipment

 

Harmonized standards applied:

 

EN ISO 12100:2010

 

EN ISO 13732-3:2008

 

EN ISO 14119:2013

 

EN 60204-1:2006/A1:2009

 

EN ISO 13849-1:2015

 

EN ISO 14120:2015

 

EN 1037:1995+A1:2008

 

EN ISO 13850:2015

 

EN ISO 11202:2010

 

EN ISO 4414:2010

 

EN ISO 13857:2008

 

EN ISO 13732-3:2008

 

Person in the European Community authorized to compile the technical documentation:

  

Cold Jet Sp.zo.o, Product Development Manager Maciej Doczekała, Łukowska 12, Oborniki 64-600, Poland 

Place and Date of Issue:  

Loveland, USA on February 19, 2019

 

Signed for and on behalf of Cold Jet, LLC: 

_______________________________________________________________

 

Arvid Nielsen

 

Director of Technology & Engineering, Sr. VP

 

2019.02.19 - AERO​

2​

 Global

Page 1 of 1

 

Summary of Contents for AERO2 PLT 60

























































Reviews: