Cold Jet AERO2 PLT 60, Operator'S Manual, Page: 37 / 56

31
Emergency Stop
The emergency stop button is used in the event that the PLT 60 must be shut down immediately. If
any event occurs that could cause harm to personnel or equipment, then use the emergency stop
to shut down the PLT 60. Once pushed, the button must be rotated clockwise to reset. Then reset
the PLT 60 on the screen.
CAUTION Do not use the emergency stop button to shut down the PLT 60 for anything
other than an emergency
Reset Screen
The reset screen appears if the emergency stop has been activated or the safeguard grate has
been removed. When the reset screen appears, first correct the issue. If the emergency stop has
been activated — reset the emergency stop by rotating clockwise. If the safeguard grate has been
removed, re-install it. Use the rotary encoder dial to press the button indicated by the animation.
This will reset the machine and the splash screen, then the home screen will boot up. The PLT 60
logic will validate that the issue has been satisfied and calibrate. After calibration, the machine will
return to its last mode of operation and the settings will return to the settings used prior to shut
down.