Cold Jet AERO2 PLT 60, Operator'S Manual, Page: 26 / 56

20
Setting Up the PLT 60
WARNING Improper installation of hoses and adapters to the PLT 60 can cause damage
to the machine.
Do not use one wrench when tightening or replacing fittings on the PLT 60.
Always use two wrenches to install and remove hoses and accessories on the PLT 60.
CAUTION When attaching the blast hose, make sure to put a 1” wrench on the SST base
connection of the rotary union. DO NOT rely on the polymer housing to keep
it from rotating. Any connections that are frozen should be thawed by running
air only through the applicator if machine has been in operation.